Custom Search



Jet engines

Jet engines are very simple devices, at least in principle. Every jet engine has three main parts, the Compressor, Combustion Chamber, and Turbines. The diagram below shows a simple axial-flow jet turbine. Air from the intake is fed through a rotating compressor stage, where a series of fan blades reduces the air volume while increasing the pressure. The pressure may increase by as much as 30 times. This compressed air flows into the combustion chamber, where fuel is being continuously injected. The resulting combustion creates a flow of hot, expanding gases. These gases flow over a turbine with a set of fan blades. Since the turbine is connected to the compressor by an axle, part of the power of the exhaust gases is used to drive the compressor. The shaft may be used to drive a machine or generate electricity. For some engines, there may be a free wheeling turbine stage on its own coaxial shaft, driving a front-mounted fan (turbofan) or propeller (turboprop).

Copyright©2005 RC Airplane Advisor

While this type of engine is simple in principle, the demands on the structures and materials are enormous. This is perhaps why such a long period of time elapsed from the world's first jet aircraft flight (Hans von Ohain, the Heinkel He 178, in 1939), to the world's first rc jet airplane flight (Jerry Jackman, 1983).

Consider for example one of the model turbine engines produced by AMT, the Pegasus HP. This engine has a diameter of 4.7 inches, length 10.4 in, and weight 5.9 lb (the full system). This machine produces 35 lb thrust with max rpm 120,000. The idle speed is 37,000 rpm, larger than the top speed of most two-stroke glow engines! The normal exhaust gas temperature is a toasty 1,110 degrees F.

Another example is the JetCat P-70, which is 3-3/4" in diameter, weighs just 2.6 pounds and produces 16.4 Lbs of thrust.

To start the engine, compressed air or an electric motor may be used. Fuel is propane gas at lower rpm, followed by kerosene for higher exhaust temperature and rpm. All of the functions can be controlled electronically.

These engines sound just like the turbines on modern jet airplanes, and can propel models to speeds well in excess of 200 mph. An rc jet airplane is definitely a high-performance aircraft. These engines are often used in very realistic, larger scale military and commercial jet rc models. While this type of model was virtually unheard of a couple decades ago, now there are many engines, models and even flying events dedicated to jets. Some of the vendors and manufacturers include: Jet Model Products, BVMjets, AMT and JetCat.

Trimble SPS751 and SPS851 Modular GPS Receivers

Trimble SPS751 and SPS851 Modular GPS ReceiversTrimble SPS751 and SPS851 Modular GPS Receivers

Trimble® SPS751 and SPS851 Modular GPS Receivers are ideal for semi-permanent or permanent setups, marine-based applications, as well as construction rover applications. The antennas can also be mounted in a marine vessel or on a site supervisor's vehicle.

The Trimble SPS751 and SPS851 receivers combine the radio and GPS receiver in a single housing. This allows contractors to secure the majority of their investment inside a site trailer or carrying case, protected from the elements and/or theft, leaving only the antennas outside.

Available in a range of options to suit your individual applications, flexibility and performance requirements, versatile Trimble GPS receivers are a future-proof investment. The receivers are designed to use all currently available satellite signals including L1, L2 and the GPS modernized L2C code. The SPS851 receiver can be upgraded with GLONASS and L5 GPS signals to optimize performance in areas of tough GPS-only conditions and maximize your investment well into the future.

Leica FCMS Flight & Sensor Control Management System

Leica FCMS Flight & Sensor Control Management System performs all tasks such as flight guidance, sensor release and sensor monitoring, on a single man-machine interface for a variety of airborne sensors.
The software runs on top-quality airborne components perfectly integrated into the sensor system. Careful attention is given to optimize the workflow starting with flight planning and ending with the deliverable data.
Features
  • Supports various sensor types as well as multi-sensor systems
  • Simple and easy to learn operation of the sensor
  • Simulator software to train operators and pilots on the ground
  • Optimized flight guidance with suggested flight path during approaches and turns
  • Vector data and ground control points as a backdrop for flight guidance
  • Automatic sensor release according to the flight plan
  • In-flight Quality control
  • Monitors completeness of project for flight plan-controlled survey flights

The optimal workflow
Perfect integration of hardware and software into one system is the key for very effective work. Leica Geosystems’ proven integrated workflow starts with Leica FPES for flight planning. Leica FCMS ensures survey flights and flight evaluation are optimized by using Leica FPES again. This entire tightly-integrated workflow uses a powerful flight plan database

Leica TS30

The new Leica TS30 total station is unique. This new total station has redefined precise surveying by offering unmatched accuracy and quality. Never again will surveyors with demanding tasks need to make compromises, the TS30 total station is ready for any challenge.
When only 0.5” accuracy is acceptable.
Pride in accuracy
Surveyors take great pride in accuracy. The Leica TS30 delivers impressive performance in individual disciplines. But most importantly it is a champion in perfectly combining angle measurement, distance measurement, automatic target recognition and motorisation. The accuracy of the Leica TS30 is in a league of its own, a true companion for surveyors with pride.

Leica TS30 accuracy - the facts:

Angular accuracy – 0,5”

Pinpoint EDM accuracy

  • 0.6 mm + 1 ppm to prism
  • 2 mm + 2 ppm to any surface
Automatic Target Recognition (ATR) accuracy – 1"

Performance that counts
Achieving both high performance and high accuracy is challenging. The Leica TS30 has reached a new level of performance, whereby high accuracy surveying can be achieved in an easy, fast and reliable way, regardless of the project demands.


World’s best Dynamic Tracking Performance


Fastest Start-to-Finish Workflow

Long service intervals

Most complete Software Suite

Laser HDS Scan Station

Leica ScanStation

A new level of versatility and speed in laser scanning. High definition laser scanning has become integral to surveying, much like GPS. DGA has purchased a Leica ScanStation, the newest member of the Leica Geosystems HDS product family. The Leica HDS ScanStation adds backsight, re-section and traverse capabilities to the industry's most popular scanner platform for accurate, cost-effective topographic and as-built surveys.

As the first instrument to combine these four fundamental total station features into one scanner, Leica ScanStation defines a new category of laser scanner:

Full 360°x270° field-of-view Survey-grade dual-axis (tilt) compensation for back-sight, re-section & traverse Survey-grade accuracy for each measurement 50,000 points/sec maximum instantaneous scan rate, Excellent practical, useful range - up to 300m for 90% surface reflectivity combines with narrow beam and ultra-fine scanning.

Create 3D models of historic buildings, archaeological sites, and complex structures.

The features and virtues of this new technology manifest themselves in many ways, including improved project cost performance, schedule reductions, deliverable quality, and safety.