Custom Search



The Indian s did it again MICROCHIPS THAT RUN ON BODYHEAT

MIT microchip, microchip batteries, energy-efficient micro-chips, Microchip power consumption, body heat power for Microchips, Anantha Chandrakasan

Today’s microchips, while tiny, still use a fair ammount of power. This means that batteries have to be large and don’t usually last very long. But what if microchips were just a little bit more efficient? That’s what a team of engineers at MIT was thinking when they set out to redesign the microchip to make it even more efficient. The result is a microchip with a power consumption that is so low it can be recharged by your very own body heat.


MIT, microchip, batteries, energy-efficiency, power consumption, body heat power, Anantha Chandrakasan, microchip2.jpg

Imagine the possibilities of bodyheat powered microchips: pacemakers could be powered by the body’s warmth, mobile phones by just moving them, and remote sensors could get energy just by the ambientenergy around them. The key lies in the team’s ability to reduce the operating voltage of the device. Rather than operating at 1.0 volts, the new microchip operates at just 0.3 volts.

MIT’s prototype microchip is only a proof of concept and it will be five years before the chip can become commercially available. Among the challenges to solve is the manufacturing process involved in making the chips. The slightest error can cause variations in the voltage, thus making the chip unusable. “Designing the chip to minimize its vulnerability to such variations is a big part of our strategy,” said Anantha Chandrakasan leader of the MIT team.

+ Team develops energy-efficient microchip

How Plastics And Nanotechnology Are Changing The Microchip Industry And The World We Live In

used plastics as a metaphor to describe the dawning age of nanotechnology and how applied uses of the new science will sneak into our daily lives with little or no fanfare, as did plastic products. But little did I know when I wrote those words that plastics were still on the march too, particularly in the microchip industry. However, let me add that nanotechnology is behind this important development. So, there!

Many major companies and some upstarts are investing heavily to produce plastic polymer microchips, including Philips, Hitachi, Samsung, Lucent, and

Plastic Logic. Plastic Logic? This seven year-old British company has developed the world’s first working plastic microchip prototype. More on the company later in this article.

Why do we need plastic microchips? After all, silicon is basically sand so how expensive can silicon microchips be to produce? Why would companies spend millions from their R&D budgets on plastic microchips? To paraphrase a well-known line from The X-Files, because the future is out there.

image

Plastic chips will be less costly to manufacture. The cost savings are more related to manufacturing and scale than to the cost of raw materials. Silicon chips require very expensive and elaborate fabrication plants, which use high temperatures and vacuums in manufacturing and also produce large amounts of waste. Plastics chips can be produced much more cheaply. With plastic polymers, there is even the potential that we can use ink-jet printing technology to make chips in our homes. “Honey, I just printed a new circuit board for the refrigerator.”

Let’s take a quick look at the science. Until recently, plastic polymers conducted electricity too slowly to challenge silicon-based materials. But it is all about chemistry in the end. Change the chemical makeup of the plastic, and all bets are off. “I was there because there was chemistry.” Monica Lewinsky. Sorry…where did that quote come from?

Let me make this quick. Using nanotechnology, scientists have modified a plastic polymer by altering its molecular structure, creating a product that can more efficiently conduct a current. And there is more: You can dissolve this new polymer to produce a current-conducting ink and then apply the ink to most any surface, from paper to buildings.

Perhaps even more than the manufacturing cost savings, the increased number of industrial, medical, scientific, business, electronic, and consumer products that can use these plastic chips is incentive enough for many companies to invest. The possibilities appear endless.

Imagine your favorite newspaper or magazine displayed on e-paper with the most current news and articles downloaded over your wireless network. So, if you didn’t have time to check the news before work, toss the e-paper into your briefcase and read it on the train. Think also of billboards automated to change in an instant, allowing many companies to time-share a few choice billboards. Consider that hospitals will be able to use flexible plastic circuit boards as patient ID bracelets, which can contain the patients’ entire medical histories and display the information directly on the bracelet or remotely to a doctor catching a quick nine holes on a pretty day.

Eventually prices of many consumer electronics will plummet because of the new low cost technology. Devices such as computers, satellite receivers, televisions, digital recorders, mobile phones, global positioning devices, and game machines will be easier to afford and become more ubiquitous in our global village, thus allowing the information revolution to continue expanding into new markets.

Then there are the non-traditional products that the second wave of plastic microchips will invade, from clothing to food. With plastic threads and sensors woven into your clothes, you will have direct

access to telephone services and the Internet and have no need for bulky separate devices. Wish you had worn a different color jacket when you left home? Not to worry, just touch a sensor and the jacket changes appearance from red to blue in an instant. On your way home, stop at the market to buy a quick meal for your family, and the electronic cooking container instructs your smart microwave or oven how to cook it.

As I promised, let’s take a look at Plastic Logic, the apparent leading company in this new plastic world. Since securing about $100 million in investment capital, this small British company is constructing a manufacturing complex in Dresden, Germany. The facility is expected to mass manufacture e-paper that is both portable and durable enough for everyday use and possessing a battery life long enough for you to read War and Peace. But with the Web 2.0 convergence of voice, text, and video, the e-paper has perhaps even greater possibilities. You may be watching bits of the film along with listening to the audio book. That would make War and Peace a bit more pleasant.

Plastic Logic expects to produce its first commercial e-paper for sale next year. Wow!

As a technical writer, I can only imagine the possibilities for delivering user and training information. How about instantly refreshing deployed user guides all at once to fix the typo on page four or rewrite the

wrong instruction on page 50. If we ignore these emerging technologies, it is at our own peril. Get ready. Time is short.

MASTER SHIPYARD




Master Shipyard (Pvt) Limited is a ship building company located at Edakochi famous for its traditional ship building and repairing legacy. The Shipyard,Dock and Workshop area is spread over a terittory of six acres. The company has so far successfully built and launched 4 barges and is in the process of constructing a coastal vessel and 3 more barges. The yard is equipped to construct vessels up to 3500 DWT. Master Shipyards is a SSI unit.

Apart from Shipbuilding we also provide dry docking, steel renewals and main and auxillary engine repair services for vessels upto 80 mts in length and sixteen meters in beam. We are fully equipped to carry out floting repairs for the vessels of all kinds. A state -of-art fabrication shop with advanced welding and cutting equipment, comprehensive material handling equipment and generator back up for the round-the-clok operations: we are committed to providing quality services to our deserving clientele.

Facilitating innovation and excellence, satisfying the requirments of vessel owners and operators with cost effective efficiency,setting new trends in the construction of bigger and better vessels,expanding our range of services to meet the most exacting demands. Master Shipyard gears up to forge new pathways of success and accomplishment in the shipbuilding sector of India.


With a capacity to build vessels of upto 4500 DWT capacity Master Shipyard has emerged as a leading ship building facility in Southern India. The yard has already delivered over five vessels of different types during the last three years and is currently building a 3500 DWT coastal vessel, a 500 DWT inland oil tanker, a 25 passenger crew boat and a 1600 DWT dry cargo cum container vessel.

Master Shipyard has recentlly signed an MoU with Indian Institute of Technology,Madras(IITM) for the consultancy for ship designing.

Dragons for alternative fuel drivers

The National Renewable Energy Lab and U.S. Department of Energy have launched a mapping tool on alternative fuels and vehicles.

Employing Google Maps, TransAtlas plots geographical locations of things like specific types of fuel stations and concentrations where certain types of alternative fuel vehicles are owned in abundance.

It plots points where production facilities and other infrastructure for alternative fuel transportation exist, as well as separate icons identifying projects under development.

The comprehensive tool allows users to turn layers on and off by checking boxes in a legend. It includes alternative fuels like hydrogen, liquefied natural gas, propane, compressed natural gas, E85, biodiesel, andelectric charging stations

Layers are also used to see vehicle density for flex fuel, diesel, and hybrid electric vehicles, as well as productionfacilities for hydrogen and ethanol.

The TransAtlas lets you ask a specific site for more detailed information by hitting the query button and then clicking on a point of interest. One click can tell you the town where an ethanol production facility is located, what capacity it's operating at, and what kind of biomass it uses.

The tool's development was sponsored by the DOE's Vehicle Technologies Program, which includes the Clean Cities initiative, a program to encourage alternative fuel development and public/private partnerships on alternative fuel projects.

National Renewable Energy Lab's map showing hydrogen production facilities in the U.S.

(Credit: Google Maps)

Long Island town promotes hydrogen


While its tech is quite different, an Air Products hydrogen fueling station is built to look like a typical gas station.

(Credit: Air Products)

Hempstead, N.Y., a small town on Long Island, is installing the island's first hydrogen fueling station.

Hempstead Supervisor Kate Murray made the announcement at the groundbreaking ceremony in conjunction with the New York State Energy Research Development Authority (NYSERDA) and the electric utility National Grid on Wednesday.

The station will actually pump three options: pure hydrogen, hydrogen with compressed natural gas, and natural gas. Air Products is contributing to the station design, build, and maintenance.

While that station will cost about $2 million to build, it will be subsidized with $1 million from NYSERDA, $55,000 in the form of a grant from National Grid, and additional tax credits.

As with the electric charging stations being installed in San Francisco, the pilot station in the town of Hempstead is being used to promote and educate the public about alternative fuel options for cars.

National Grid will own the station for the first three years, after which it will be handed over to the town. The station will be networked with others under the New York State Hydrogen Energy Roadmap.

"While it's gratifying to be at the forefront of 'green energy' initiatives, it's more important to contribute in a meaningful way toward the goals of reducing our reliance on fossil fuels and reducing environmental pollutants. This effort is an important step toward achieving those priorities," Murray said in a statement to the press.